Anemone | Super low hardware sillyshell plunger blaster

This uses Sillyshells, get them here: https://www.printables.com/model/880038-silly-shells-for-homemade-nerf-blasters

Thanks to sillybutts for creating the sillyshell ecosystem!

Overview:

• Handcannon blaster for sillyshells, Fires pretty much anything nerf related
• High plunger volume
• Every gasket and seal and the propulsion is made from string and silicone oil, no additional hardware required
• Tactical version with more rail and a stock included
• Highly adjustable performance, just tie the string differently

Printing and hardware:

• If you cant get it to seal well enough here is a link to the .step for the plungerhead, where you can adjust the tightness of the string coil
• 180mm³ Printer needed
• 4mm elastic string required (this stuff), like 2 meters depending on how many loops you want and how many tries it takes you to make a gasket
• Print the plungerhead, sear, plungerrod, reinforcements and ejector with 5 wall loops
• The rest needs 3 walls, 20% Gyroid Infill

Showoff video:

Assembly guide:

Update Log:
13.5.2025 : Added A tiny Obstruction in the Air channel so you cant accidentally vacuum darts into the plungertube