Guitar Strap Locking Clip

DT3D_PRINT GUITAR STRAP LOCKING CLIP

This is my guitar strap locking clip

The clip allows you to lock the guitar shoulder straps prone to falling and coming off.

**WARNING….DO NOT SWING GUITAR AROUND YOUR NECK WITH THESE CLIPS ON :)**

This clip will lock the strap in place & is easy to install and remove. 

ASSEMBLY

• Just align the strap button with the round opening on the underside, press down and forward until the clip locks in place
• To remove, Just prise up the front of the clip and it should release.
• The clip will fit on most guitars
• Clips work better on thin straps, but will work on thick straps. 

PRINT SETTINGS

• 
• POSITION AS ABOVE
• AUTO NORMAL SUPPORTS
• 0.1 LAYER HEIGHT
• 4 WALL/LOOPS
• MAKE SURE YOUR LAYER ADHESION IS ADEQUATE