BTT EBB36 CAN Board mount for Galileo 2 Extruder (Stealthburner)

This is a simple adapter made to allow the EBB36 board to be placed on the pancake motor of the Galileo 2 extruder parallel to the X extrusion.

With this you can use stock cable chain mount

Warning. Print 2 PCB spacers - you need them to “lift” the board against the adapter plane.

Required:
4x M3x12 screws (any flat head will do, I recommend cylindrical)
2x M3 hexnuts

Installation:
1. Screw the 2 hex spacers (which are supplied with the board) onto the protruding part of the motor screws
2. Secure the adapter on top of these spacers with 2 M3x12 screws
3. Put 2 of the printed spacers in between of the board and secure the sandwich using left 2 M3x12 screws and 2 M3 hexnuts

Printing material: ABS (since the adapter is near the hot zone)
Printing parameters: whatever ABS is comfortable with. I suggest using Voron's standard print settings.