S-Curve Universal Phone Stand
A single, flowing print brings this stand to life — prints in one piece and pops off the bed ready to hold any phone.
1
13
0
38
updated May 6, 2025
Description
PDFA single, flowing print brings this stand to life — prints in one piece and pops off the bed ready to hold any smartphone, no supports, no assembly.
Its 70 ° display angle strikes the sweet spot between glare-free viewing and fingertip reach, making it a handy companion on your desk, night-stand, or mixing station.
Key features
- Monolithic 3D print – sliced as one part, so it comes off the bed ready to use; no supports needed when printed on its spine
- Cable-ready cut-outs – front and rear slots guide a USB-C, Lightning, or micro-USB lead without kinking, so you can top-up the battery while you binge or Zoom
- Grippy & stable – wide base and low center of gravity; add stick-on silicone dots for extra traction on glass or polished wood
| Filament | PLA, PETG, ASA, or ABS (rigid materials only) |
| Layer height | 0.20 mm (0.16 mm for a smoother front face) |
| Walls / perimeters | 4 |
| Top / bottom layers | 5 |
| Infill | 20 % gyroid (30 % if you need extra heft) |
| Build orientation | Lay the long back edge flat on the bed; it grows upward with zero supports. |
| Print time | ≈ 1 h 05 m on a Bambu A1 mini (0.4 mm nozzle, 0.20 mm layers, 120 mm/s nominal speed). |
Tags
Model origin
The author marked this model as their own original creation.
