BTT Manta M5P enclosure for Sovol SV06 or SV06 Plus

This is an enclosure I designed to fit a BTT Manta M5P for Sovol SV06 or SV06 Plus. I have both printers and it fits both. This fits into the same quick-connect brackets that the stock electronics box uses. 

The printer with all the green printed parts is my SV06. The printer with the gray parts is my SV06 Plus.  

You will need:

• BTT Manta M5P
• some M3 brass threaded inserts
• 80mm 24V fan
• 80mm fan grill
• four M4 brass threaded inserts

There are optional braces for each type of printer. This brace connects the back of the box to the frame so its movement is constrained during fast printing. You'll need one more M3 threaded insert, two M3 t-nuts, and three M3 machine screws if you decide to add the appropriate brace. If you add the brace, the extra M3 threaded insert goes into the bottom rear corner of the box (the same top-to-bottom hole that holds that corner of the lid).