Miele Vacuum Cleaner Wheel

Replacement wheel for the Miele S275i (probably fits other models too).

You will need two 8 or 10 mm M3 screws for assembly.

I have printed the two wheel halves in PETG and I'm hoping it's going to be resistant enough to abrasion and impacts. I will update the description in case I find it inadequate. I used 40% honeycomb infill, but increased to 80% for the small tips.

I printed the wheel cover in 30D TPU with 65% honeycomb infill, resulting in a hardness similar to the original wheel. I think 40D/80A could also give good results with a lower infill percentage.