Ender KE Guppy Screen Stand

Center horizontal screen mount for the Ender 3 V3 KE with guppyscreen. Printed with 0.14mm LH, 4 walls, 4 tops, 4 bottoms, 15% cubic infill, no supports. Mine is in PETG-CF

Cable can be re-routed by removing the bottom panel. There are cuts in the bottom panel that allows it to be bent up making room for the new cable exit as pictured. The stand is then screwed in to the front center screw hole using the existing screw. Rubber/felt feet can be had from any hardware store. Feet hole diameter is 8.2 mm. Pegs should fit well and can be superglued in place.

You will also have to modify the guppyscreen config file screen rotation value to 2.(I wanted the usb ports on the bottom)