Airplane bookmark - Fokker Dr1

Description:

Embrace your Avgeek side with this bookmark inspired by one of history's most famous biplanes. It's based on the German Fokker Dr. 1 fighter plane, flown by the famous ace Manfred von Richthofen, the Red Baron.

This unique bookmark, optimized for quick and easy multi-color 3D printing, can be a companion for even the most aviation-loving readers. With a detailed and thoughtful design, this bookmark fits perfectly on the pages of any book, without damaging or warping it.

Printing parameters:

MULTICOLOUR SETTINGS
The 3D design is optimized for simple multi-color printing. It can be printed on printers with either manual or automatic filament changes. If the filament is changed manually, the color palette chosen in the design optimizes printing, requiring only 9 filament changes at a layer height of 0.2 mm.

GENERAL SETTINGS
Print the model completely horizontally on the print bed. For a better finish, activate the iron-on option on the top layer of the model. No supports or additional adhesion to the bed are required. A 0.2 mm noozle is recomended, but the model can be printed using a 0.4mm noozle with a well calibrated printer.
RESCALING SETTINGS
Rescale the model only on the X and Y axes; do not increase or decrease the scale on the Z axis to avoid compromising its use as a bookmark. It is not recommended to print the model at a smaller scale than the original, as this may cause loss of detail or printing problems.