(Stock Stealthburner Compatible) Galileo 2 D2HW-C201H Filament Sensor + FilamATrix Support + EBB USB Support

See the FilamATrix Github for additional info and other needed modded parts (includes parts to support the EBB SB2209 USB board).

See the EBB SB2209 USB GitHub for additional info and other needed modded parts if not using the FilamATrix mod.

See included photo instructions for assembly assistance.

This remix is compatible the standard Stealthburner unit.

Print Settings:

• Normal Voron print settings
• Printing with supports is recommended. See included photo for where I painted on supports. You probably don't need supports for the wire canals but up to you.
  • Don't put supports in the area where the bearing needs to go 

Bill of Materials:

• 1x Omron D2HW-C01 microswitch
• 1x MR63ZZ bearing
• 1x M3 Voron spec heat insert
• 1x M3x12 SHCS screw (original mod uses M3x10)

Revisions:

• 5/6/25
  • Added missing 0.4mm chamfer (standard) to heat sink socket
  • Re-uploaded full.step and all STLs excluding switch_cover.stl
• 5/13/25
  • Removed corner chamfer for cable cover door that was mistakenly left over from working on EBB USB versions
  • Re-uploaded full.step, g2e_stock.stl, and g2e_filamatrix.stl

1. No need for modded Stealthburner face
2. Higher quality FilamATrix bodies
3. Higher quality EBB USB bodies