pencil pen holder wall mount / Stifte Halter Wandmontage

This is a holder for pens - the maximum width inside is 54 mm and the depth of approx. 30-40 mm due to the camfer outside.

Works with PLA

A layer height of 0.1 mm is recommended due to the slope on the top - takes longer to print but looks better.I have used 20% infill.

Take care that you don't apply to much torque when your screw it to the wall - PLA Models have a tendency to crack. 

If you like the model please leave a like :-) - thanks. This helps me to understand which things are also useful for others.

I do have a similiar model - designed for remote controls - so if you need a second similar one please check out my other models.