Mitsubishi Minisplit Remote Holder

Printed well in PLA (Bambulab Light Gray Basic PLA), seems durable enough. Left off the mounting screw holes and opted for command strip adhesive. Removed the tabs from the command strips so removing it from the wall might require dental floss, but this has a clean and easy install.

The hook thickness is just snug enough, you may need to experiment, or plan to file it down to thickness depending on your printer, filament, and remote dimensions.

Printed with 4 wall loops, 5 top shell layers, 15% grid infill. PLA support with PETG interface material.

Adjusted the hook to be flat for easier support printing and separation, removed mounting holes, lengthened overall part. Kept in STEP format for others to adjust as necessary.