Piranha Single-Print Track

This is the second iteration of a one-print track for the Piranha Death Racer model. The individual treads can be a pain to put together with all the 2x50mm rods, so I took them right out of the equation! If you can't print TPU without stringing, I wouldn't recommend this mod. These haven't been thoroughly torture tested over a long period of use time and may stretch depending on material and print settings. I used 95a TPU with 3 walls and 15% infill. The test I did with 90a and the same print settings were way too stretchy and kept rolling off. Let me know if you find different settings that work better!