Sovol SV06 BTT Eddy Duo Mount

This is a simple adaptor to mount a BTT Eddy Duo sensor in place of the stock inductive sensor.  Included is a cable clip to help keep the cable out of the way.

It is designed such that the sensor is at the recommended height above the nozzle. Unfortunately, this puts the top part of the sensor over one of the stock mounting screw holes. Due to this, you will need to bolt the mount to the extruder without the sensor attached and then bolt the sensor to the mount.  

The thickness of the adaptor is such that you can re-use the mounting screws from the original inductive probe holder to attach the new adaptor to the extruder head.  The sensor mounting holes are sized so that you can use the M3 screws supplied with the sensor as self tapping screws.

You will need to adjust the probe offset numbers in your .cfg file to the following:

x_offset: 30.841
y_offset: -23.931

EDIT:  Updated offset numbers (previous numbers were incorrect)