Stormtrooper Star Wars Hueforge

Gran cuadro de Stormtrooper con su fusil, he utilzado Hueforge para poder imprimir en 3d

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #15 (1.28mm) swap to Orange
At layer #16 (1.36mm) swap to Jade White for the rest.

Este nuevo hueforge consta de 4 partes para hacer uno de 450mm x 450 mm

Seguir estas instrucciones para el hueforge tamaño grande

This new hueforge consists of 4 parts to make one 450mm x 450mm

Follow these instructions for the large hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Gray
At layer #15 (1.28mm) swap to Orange
At layer #17 (1.44mm) swap to Jade White for the rest.