Goosky RS4 battery retention clip

A 3D printable replacement for the carbon fiber clip for battery retention. I assemble my clip differently from the manual; I put the metal component of the clip in between the helicopter frame and this plastic part to increase the amount of the metal tab that protrudes to catch the battery tray, and increase the force keeping the metal tab in place.

I printed in PETG, 0.1 mm layers, 6 top layers and 3 bottom, with gyroid filling.

!!!NOTE!!! threadlocker will attack PETG (and most other plastics). Even fumes may damage it. For now I would not recommend applying threadlocker to this part. Check the part is sufficiently screwed in and for damage before every flight.