Barrina T8 Vertical Light Stand with Screw Holes

I made this stand for the Barrina T8 lights. I got tired of my lights being so easy to knock over on my tower system, so I made these. They actually are really stable and sturdy. These can probably be printed with a low infill and be strong. I used stock slicer settings.

There are 4 screw holes, I only used 2 and it's stout. They will probably fit most any screw that has a cone. You could use flat screws but I designed it for the regular screws like any drywall, most wood screws, and some multi purpose screws you will find at any hardware store or around your house.

***** Print upside down on the smaller part, no supports needed. If you print right side up, you will need supports.

Hope this helps, enjoy.

Allows the T8 light to be screwed down to a board or other object.