Replacement grill pegs for PSB Speakers.
-These work with my older PSB Century 600 and PSB Century 800 speakers. They may also work with other PSB speaker series—I’d appreciate any feedback on compatibility. While these pegs look quite different from the stock ones, they’ve worked well for me and have a much stronger design. I own three sets of these PSB speakers and have had to replace 5–6 original pegs. I’m not sure if age has weakened the original plastic or if the environment (a farm shed) played a role.
-I printed these using standard settings with PLA and PLA+.
Dimensions:
- Speaker box side insert diameter: 0.45" (11.43 mm)
- Grill-side peg diameter: 0.46" (11.68 mm)
Installation notes:
- The original broken peg can be pushed out of the grill since the hole goes all the way through.
- For the speaker box side, the easiest method is to drill out the peg using a smaller 7/16" or 1/4" drill bit, followed by a pick or screwdriver to pull plug out.
- Keep the drill centered to avoid enlarging or damaging the peg hole.
- You might also try prying it off, but drilling seems a lot quicker, and prying could damage the finish.
The author marked this model as their own original creation.