Nescafe DolceGusto capsule holder (rotating)

DolceGusto capsule holder. It rotates :)

You need a lot of superglue, so when putting together the sprocket and U-shaped holders, I recommend putting the holders and the sprocket together, wrapping them with a rubber band, and then, one by one, lifting the U holder and adding superglue to the joints.

The base should also be glued, note that the cap is glued to the edge, not the bottom of the base. I used a blank cap for the base and branded for the top. 

When putting the lips, I used only one “Nescafe” lip; others are blank (beauty is in the simplicity) but you can use all of them branded, or neither - as you prefer. 

Added branding on a lip and a top cap