CutePanda

Project: Panda_01.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 156x156mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA 3DHoJor Blue Grey Transmission Distance: 2.4
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Misletoe Green Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions for one AMS:
Start with Black (slot1)
At layer #7 (0.64mm) swap to Blue Grey (slot2)
At layer #10 (0.88mm) swap to White (slot3)
At layer #18 (1.52mm) swap to Misletoe Green (slot4)
At layer #22 (1.84mm) swap to White for the rest.