Behind Barz Removable Cage Mod Adapter Plate

Typically, a front cage with the “Removable Cage Mod” option requires a compatible, similarly modified tube to sit properly. This adapter plate can be used to have the front cage sit properly on tubes without the “Removable Cage Mod” option.

To use, remove one of the standard metal spacer plates, and use this as the top plate that the front cage sits in.

Haven't tested this enough to see how well it holds up over time - clearly plastic isn't as durable as metal, but enough perimeter walls/infill should get you something durable enough for normal use. 

Definitely could be tweaked a little bit to match the shape exactly, but this was close enough and I struggle too much with CAD to keep trying. Presumably, the center hole size could also be modified if 3 lock system compatibility is required as well.

https://cad.onshape.com/documents/6e958a9cb2a1f3812d22dfeb/w/6bf73e451fb681f5e27c6125/e/2f785b6388e4689a8d443c7a?renderMode=0&uiState=681578021353ab340e743d45