Mandalorian Crest Stamp - "This is the way"

Print this Mandalorian Crest Stamp using a FLEX material.  The stamp shown in the photos was printed using Matterhackers Grey TPU.  The settings are shown in the .3mf file.

**Prints nicely on a Textured plate without glue since the stamp face is not on the build plate.

**A light, 5 to 10 minute sanding of the stamp face works well.

Settings:

1.) 0.20 mm (Structural) layers

2.) Generic FLEX

3.) 15% Infill

4.) Orient with stamp face directed upwards (away) from build plate

5.) No supports

Could also scale the model up a bit or use an SLA printer for better detail in the lettering, etc.

Enjoy!

See my other Stamps & Seals contest entries here.