Voron 2.4 Quick Release 270 Degree Door Hinges

A set of door hinges that allow opening to doors to 270 degrees as well as fast removal of the doors.

They were designed to provide clearance for the LDO kit panels and tape (4mm in total) as well as bobbleheed's Magnetic Panels mod.

They also allow mounting to the door panels using either VHB tape or M3 bolts. Or both if you feel you like you need the most support possible for your door panels :)

Hardware:

• 4x M3x12 SHCS bolts and 4x M3 T nuts for mounting to the frame
• 4x 5x40mm dowel pins for assembling the hinges
• 4x M3x8 FHCS bolts and 3 M3x5x4 heat inserts for mounting to the door panels

or

• 4x 18x30x1mm VHB tape patches for mounting to the door panels

Printing:
 

• Standard Voron print settings
• Orientation: STL files are oriented properly. If you want to print the STEP files instead you will have to orient them like the STLs.

Sources can be found here.