Bambu Lab H2D 4 in 1 adapter with spool holder

This is only suitable for a Bambu labs H2D.

This replaces the existing Bambu supplied spool holder.

NOTE!

Addon part for second 4 in 1 adapter available here:

https://www.printables.com/model/1310008-addon-for-h2d-4-in-1-adapter-with-spool-holder

The bracket is designed for the 4 in 1 adapter.

I realise the placement isn't suitable/ideal for some uses, I use it for the non AMS side, connected to a dry box.

You will need 1no. M4 machine screw  with 11-12mm of thread.

The spool should be placed so that it will turn clockwise.

I would not recommend tightening the spool holder too much because it will break.

I used Gyroid infill at 20%, PETG.