Accessory Secure Mounts Compatible With WFI Workbench Suspension Rail

I got a “Tor”workbench from Gerdmans which is made by WFI with an optional system to attach plastic trays, with the intention to mount my own accessories to it. This system is sold through various workbench retailers at least in the Nordics under different names. 

These mounts replace the earlier hook mount versions I designed some time ago. These are mounted by sliding them on from the edge of the mount rather than hooking them on the top. They can not be lifted off accidentally when lifting things out of their holders, like the old ones.

Currently the available mounts include:

	Bambu glue stick (or other glue stick) holder. Available in single, double and triple sizes. See below for one for liquid glues.
	Bambu Lab scraper
	A mount for these brushes from Amazon
	A large hook. I use this for storing tape on.
	Liquid glue holder. Available in single, double and triple sizes. Fits Magigoo and Bambu Lab glues. See above for one for glue sticks.
	A pot one, but with holes in the sides. I put pens and other similar things in it.
	Wera screwdriver wall mount units (two pictured) - this requires two M4 inserts and two M4x6 or M4x8 screws and washers.
	A mount with 18mm holes, for storing random roundish objects in.
	4 trays for storing arbitrary things. Make sure you are happy with the support solution with this one!

For printing, Prusa XL and Bambu Studio configured 3MFs as well as un-configured 3MFs are provided. The supports in the Bambu profiles are optimised for H2D, so you may want to review these.