8BitDo Pro2 Controller Charging Dock (mount on HSW with extra bracket)

Designed to ensure smooth docking* and undocking of the controller. I use this mounted to HSW so if used standalone you may need to adjust the model. If using USB-C cable then additional cable cover is required for the bottom.

Print settings:

• 0.3mm layer height
• 3 perimeters
• supports under the USB-C hole as per the screenshot

Assembly:

• Cable cover: M2x6 plastic screws
• HSW bracket: M3x8 plastic screws

Note:

1) * I did not get the docking 100% smooth due to time constraints, if anyone improves it please let me know!

2) Undocking may require more force due to USB-C charging cable.

3) Example HSW bracket is included, however if specific placement is required then it may be best to design your own.

4) Model may need adjusting based on the USB-C cable to be used. USB-C cable I used: https://jp.daisonet.com/products/4562380817112?_pos=3&_sid=3c68ab3b6&_ss=r 

STEP file of assembly can be provided - comment if you need it