Alpakka Controller touch hexagon mask

Alpakka Controller project: https://inputlabs.io/
Reference case design: https://github.com/inputlabs/alpakka_case

Snap-on mask for touch hexagon of Alpakka Controller. When this mask is attached it allows to limit the touch-sensitive surface in games when the more precise control over gyro on/off mode is needed. This modification is similar in its purpose to screw mod, but allows to quickly bring back the full surface when mask is removed.

Printing instructions:

• 0.15mm layer height, 0.2-0.24 first layer height.
• Very slow first layer, as the surface is a single layer only.
• Let the table to cool off completely, otherwise it will warp upon removal.

There are several STL files for different hole sizes.

Original hexagon model was used to match the button holes and shape.