Pourover Coffee Station

I LOVE COFFEE, so I wanted to make a cool pourover coffee station that would help my routine each and every day. So I designed and make this mionamilistic coffee station that will aid you in your pourover coffee. This station has a compartment for storing a spray bottle for water, 2 regular sized coasters, 2 mini expresso coasters, a pullout drawer for filter paper, and a dosing cup on top for weighing your coffee. I hope you enjoy this model and please reach out if you have any questions or concerns.

Assembly:

For assembling this coffee station, it will be printed in a couple of parts. I recommend using hot glue for the everything except the magnets (I use superglue for the them), but you can use whatever glue you want. I have made a short YouTube video that explains how to assemble. I am a visual person and I thought it would be easier to explain how to assemble with a video.

YouTube Assembly video link: 

Here are the written instructions:

Start by glueing these two pieces together.

Next insert the LONG female connector in the center hinge holes.

Insert the SHORT female connector on each outside hinge holes.

Next glue in the SHORT male connector on the outside two hinges and one LONG male connector on the center hinge.

This is where the LONG male connector goes.

This is where the SHORT male connector goes.

Optional: if you want the hinge to be magnetic, you can super glue in some magnets in the slots already in the model. PLEASE make sure to get the polarity correct. 

Now stick on some rubber feet and enjoy!

LINKS:

Amber spray bottle 2 Oz: https://a.co/d/aKu0W2f

Magnets: https://a.co/d/9T2lgpS

Sticky Rubber Feet: https://a.co/d/4oORIpe 

Hario Coffee Filter for V60 Pourover: https://a.co/d/8Kmc1d6