VicMarc 120/150 chuck jaw mounts

Stackable or wall-mounted organizers for extra chuck jaws. Prior to this, all my chuck jaws were loose in the same box. 

Models fit most jaws for VicMarc 120 chucks, or VicMarc 150 chucks. I also made another mount version for Nova 100mm chucks.

Notes:

• Print the mount in PETG or stronger with a few extra perimeters. DO NOT USE PLA due to potential layer sheer on the post if you are wall-mounting these.
• I have some very large 200mm (8-inch) jaws, so I added extra large variant for those, but it's only needed if you stack extra large jaws. Either version works for large jaws when wall mounting.
• Lock is only needed if you want extra security when wall-mounting. Print the lock in TPU/Flex. I included models with differences snug tolerances depending on your printer's capabilities. 
• If you print both these and the Nova jaws, I'd recommending printing the TPU/Flex locks for each size in a different color TPU. Those are almost exactly the same size between variants, but not quite.

Happy turning!