Nova chuck jaw mounts

Stackable or wall-mounted organizers for extra chuck jaws. Prior to this, all my chuck jaws were loose in the same box. 

Models fit most jaws for Nova chucks: Original Scroll Chuck, Nova Lite G3, SuperNova2, Titan III, etc. I also made another version for VicMarc 120/150 chuck jaws.

Notes:

• Print the mount in PETG or stronger with a few extra perimeters. DO NOT USE PLA due to potential layer sheer on the post if you are wall-mounting these.
• Only use the “single post” version for the uncommon single-post jaws. See photos for one example.
• "Long Post" version (not pictured) is for extra-tall jaws like shark jaws, step jaws, and Nova's awesome new dome jaws. 
• Lock is only needed if you want extra security when wall-mounting. Print the lock in TPU/Flex. I included models with 0.2mm and 0.15mm tolerances. 
• If you print both these and the VicMarc jaws, I'd recommending printing the TPU/Flex locks for each size in a different color TPU. Those are almost exactly the same size between variants, but not quite.

Happy turning!