Sovol SV07 toolhead filament guide

This filament guide screws into the two screw holes that the stock blue cover screws into. There is a version with an m10 thread and a version with a m8 thread for ptfe tube couplers to screw into. 

I've included the Fusion file for those who want to modify it.

Printed at 0.3mm layer height. Orient with threads along z axis. Supports can be used for the smaller screw holes at the bottom of the part but are likely not necessary. Will want to print the thread slowly for best results. You can do so by altering the small radius settings in your slicer.