Ramp for Robotic Vacuum Cleaner – IKEA PAX Entry Helper

Full Description:
This 3D printable ramp helps robotic vacuum cleaners climb into IKEA’s PAX wardrobe system, which often has a raised floor lip that many vacuums can't handle on their own.

The main ramp and optional extension have been designed to work together, depending on your robot’s climbing ability.

📐 Dimensions

Main Ramp: 83 mm high, 225 mm wide, 300 mm long

Extension Segment: 21 mm high, 113 mm long, 225 mm wide
(Print two extension segments and place them side by side for full coverage)

🧩 Features

• Sized to fit the IKEA PAX raised floor profile
• Smooth slope for most round robotic vacuums
• Optional extension reduces incline for sensitive models
• Simple print-and-use design
• No hardware or support needed

🛠 Printing & Usage

Material: PLA is fine

Infill: 15–30%

Wall thickness: >0.6mm recommended

Supports: Not needed

Orientation: Print both pieces flat on their side, coyudl be neccessary to put it diagonally for it to fit depending on the printer size

You can secure the ramps using non-slip pads or double-sided tape to keep them in place if needed.

This is especially useful if:

• You store your vacuum in the wardrobe
• You want to avoid modifying furniture