6 Inch Rack Blank 2U

I needed a 2u rack blank for mounting a power supply adapter.
I simply took the awesome 1u design, duplicated and attached at the long seam.
Thanks to the original author (Maurício Pessoa).
https://www.printables.com/model/1173696-3d-printable-rack-10-inch-and-6-inch

Here is the rocker switch module I used:
https://www.amazon.com/dp/B07RQV2NPN

I used a dremel to outline the hole for the module; then used a small drill for the two mounting holes.  I then used M2 screws and nuts to attach the module.

The purpose of this is to keep all wiring inside the rack.  All three power adapters (switch, 2 pi's) will plug into a 3-outlet strip hidden in the rack.  This strip is then wired to the adapter module.

I needed a 2u rack blank for mounting a power supply adapter.
I simply took the awesome 1u design, duplicated and attached at the long seam.
Thanks to the original author (Maurício Pessoa).
https://www.printables.com/model/1173696-3d-printable-rack-10-inch-and-6-inch