Fursuit Head Dryer

I wanted a more portable fursuit head dryer that I could take to cons. I came up with this two part head stand. It uses a standard 120mm fan and is designed to fold up into a resealable bag (including the fan). 

Print settings that I used:

• Polymaker Polylite ABS
• 0.4mm nozzle
• 0.20mm layer height
• 3 wall lines
• 5 top/bottom layers
• 30% infill
• support enabled everywhere for the top part

Notes:

• Both parts have built-in hinges and are designed to print in place
• Having support enabled is required for the top part
• I recommend using a fan with a fan grill to prevent fabric or fingers coming into contact with the fan blades
• (optional) You can add a sheet of paper/cardboard with the center cut out between the fan and feet to improve air flow. A pdf template is provided