Holder for NEBO Mini Larry 500 Flashlight

Needed a way to hold this flashlight on the Proaim Camera Assistant Front Tray I use in the studio. I didn't like just setting it into a place in the tray, so I made this flashlight holder that  sticks to the front of the tray. Now I can easily grab the light and when I'm done with it, I can just clip the light back in.

Details: 

• Light: NEBO Mini Larry 500 Pocket Flashlight
• Adhesive: 3M ½" Double-Sided Adhesive Tape

Print Settings: 

• Print part as orientated with main section on the plate
• Material: PETG for flexibility 
• Nozzle: 0.4mm
• Layer Height: 0.2mm-0.3mm
• Infill: 15%
• Wall Count: 2-3
• Top/Bottom Layers: 3-4
• Supports: None

Install:

1. Apply ½" double-sided tape in the channel on the rear of the part
2. Stick to whatever vertical surface you want

Notes: 

• Holder was designed to hold the light with the belt clip facing outwards. Otherwise the light can be orientated up or down in the holder.