Tower / Castle Figure for Boardgame

This is a second version of the simple tower I made
(https://www.prusaprinters.org/prints/127959-tower-castle-figure-for-boardgame-simple-design)
I use it as part of my board game figures.

Printed on MK3S+, with PLA in 0.1mm.
No supports needed. Used brim, although not sure if necessary.
Print took 1h10mins.

Available files:

STL 
 “Tower_figure_v2.stl” - standard STL file to be used to choose your own settings for printout

MF3 
“Tower_v2_0-1mm_detail.mf3” - project file with all the settings for 0.1mm print.
“Tower_v2_0-2mm_quality.mf3” - project file with all the settings for 0.2mm print.

Gcode 
 “Tower_v2_0-1mm_PLA_MK3S_1h16m.gcode” - ready to print file 0.1mm
“Tower_v2_0-2mm_PLA_MK3S_35m.gcode” - ready to print file 0.2mm