230 V desktop socket

230 V socket holder for desktop mounting by screws.

The cable can be attached by zip tie.

I used:

• 230 V socket holder Z134F (073-102 from gme.cz)
• switch BULGIN C5503PBBR3 (631-058 from gme.cz)
• flexo power cord 3x2,5mm2
• M4 threaded inserts 4pcs (you can use standard M4 screw with standard M4 nut too)

Recommened print settings:

• material PETG or PLA
• 3 perimeters
• 40 % infill
• no support needed