Cable Hook for Flashpoint Junior Wheeled Stand

Like most photographers, I've always just hung my extension cords for my lights on the light stand knobs or any other horizontal part on a stand/cart. Got tired of having to relocate the extension cables and hanging them elsewhere while I adjusted the riser sections on a stand. So I made this cable hook that hangs from the bottom adjustment knob on my main wheeled light stand. 
 

Light Stand Details: 

• Flashpoint Junior Steel Wheeled Light Stand 12'
• Thread OD: 0.385"/9.779mm
• Thread Length: 0.220"/5.588mm

Print Settings: 

• Print part on its side
• Material: I used some PETG. PLA/PLA+ would work as well. 
• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Infill: 25-35%
• Wall Count: 3-4 
• Top/Bottom Layers: 4-5
• Supports: None 

Install: 

1. Unthread bottom knob on stand
2. Thread the knob through the hole on the hook
3. Thread the knob back on to the stand