Trunks Dragon Ball Z Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.4mm

Swap Instructions: 

Start with Black At layer #6 (0.56mm) 

swap to Yellow At layer #10 (0.88mm) 

swap to Green At layer #16 (1.36mm) 

swap to Black At layer #24 (2mm) 

swap to White for the rest.