Ford Fiesta-Fusion MK5-MK6 Fuel cup bowden Flexible

Ford Fiesta/Fusion (2004-2008) Diesel/Petrol Fuel cup bowden. Print from flexible filament (TPU/TPE/Ninjaflex etc.).

Infill 30-40%

1. Print
2. Cut out the original hard plastic ring from the cup.
3. Use a little grease on the ring for freely rotating.
4. Push the part on the cup groove.
5. Push the part on the fuel door hole.

V2 Is bigger ring diameter. (+0.5mm) (Better rotation, easier install)