RoboForce Spider Base

This is an optional bottom half that can be used for the RoboForce figures I've been re-designing and printing at ⅔ scale of the original toys. The current designs are specific to different characters. I might create a generic base to work with anyone in the future. 

The Bottom and End Leg Segments should be printed with supports for best results. The other parts can be printed in the existing orientation without brim or supports.

It's very important to print the Socket Base and Leg Peg parts in PETG or something stronger than standard PLA or even PLA+ filament. You need a material that can flex and keep a good grip on the parts over time.

Assembly: 

Tolerances were tight enough on my printer to just insert the Socket Base and Leg Peg into my printed segments with a bit of force. If yours feel loose just include a bit of glue before assembling. Pictures included here are using the Accordion Leg Segment Short pieces.

Start with a Socket Base and Leg Peg inserted into the Bottom Leg Segment. Then attach this to the ball of the Main Body. Next, insert a Socket Base and Leg Peg into the Accordion Leg Segment (either Long or Short, depending on which you like) and attach it to the Bottom Leg Segment. Finally, insert a Socket Base into the End Leg Segment and attach it to the Accordion Leg Segment. Repeat for each of the six legs and the base is complete!

RoboForce Figures (so far):

• SOTA
• Hun-Dred
• Coptor
• Enemy
• Wrecker
• Vulgar
• Maxx 25
• Cruel

Bases:

• Tank Base
• Rocket Base
• Magnet Base
• Spider Base