M4 Conical Screws (Hex head) and nut 2mm-27mm

xpectations:

Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. 

The screw may need to be resized because of inaccuracy of FDM printing.

Print settings: 

• Speed: about 20mm/s
• Infill: 20-100%
• Number of walls: 2-4 

All screws and nuts:

• M2
• M2,5
• M3
• M4
• M5 
• M6

Have fun printing! (and ask if you need any help)

If you wish you can donate on my ko-fi page.