These are the components to build a triple or double Elektron gear stand. For the triple stand it supports a Digitakt, Digitone, Octatrack combination. You can also fit four boxes the size of a Digitakt or Digitone.
You connect the side panels with the connectors, and you have a clip you can add to the connectors to support the Elektron boxes. Please have a close watch to the example on how to connect all the components.
I printed all components 0.2 PETG. On a Prusa i3 MK3+ default profiles.
TIP: I used M3 bolts and nuts on all the holes. They fit screw tight, but to make assembly a little easier I would drill the holes a tiny bit wider so you can push the bolts through without the need to screw them in. I also used washers on the slides for a more stable connection.
The author hasn't provided the model origin yet.