Swiftpoint Z Button Caps

The rubber button caps on my Z started deteriorating so I figured why not print new ones, so here we are.

Print Settings:
These files are not designed for any specific print settings, that being said, I printed them with the Standard ZeroG settings:
0.4mm nozzle
0.25mm first layer, 0.2mm layers
0.4mm line width forced
4 Walls
5 Top/Bottom layers
40% Cubic Infill
Smaller nozzle should work equally as well if not better since the layer lines on the top will be less pronounced, bigger is probably not the best idea.

You will need supports (sorry, I havent figured out a way to make them print without supports and still work as intended).


If someone decides to try this in resin, please let me know how well it worked :)