Raspberry Pi Case - Printrbot Simple 1405 Maker's Edition
Description
PDFThis is a case for the raspberry model B and the printrbot simple 1405. This is useful for people who want to realize a timelapse and/or use octoprint.
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Simple Metal
Doesn't Matter
Resolution:
0.2 mm (First Layer : 0.3 mm)
30% (Honeycomb)
Notes:
The files with "_support" already contains the support. I recommend Meshmixer to generate the support if necessary. Warning : the "camera_front" might need support but try to not add support in the thin gap where the camera cable has to be inserted.
There are holes on the "camera head" but the parts hold together without screws.
The case and the raspberry can be fixed with the spare screws of the printrbot.
The ethernet hole might need adjustment.
Assembly Instruction
Place the bottom of the case by removing the two screws on the left side of the printer. Add the camera in the "camera head". Insert the camera cable through the arm then place the top screw between the arm and the case (the nut has to be on the arm side). Do not tight the screw yet and continue to insert the camera cable to the case then tight the screw. Plug the cable and put the raspberry in place then add the top of the case and add the two screws on the bottom side.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.