Minecraft Globe

Minecraft Globe Banner Pattern 2D Sculpture

This 2D Sculpture Depicts The “Globe Banner Pattern” With A Few Modifications So It Does Not Come Apart.

This Simple 3D Model Was Made With OnShape Online 3D Software.

This Is My First Model That I Upload So Give Me Your Feedback 😊.

Print Settings :

• For The Globe :
  • 100 % Infill
  • Print As-Is Or Scale (If You Scale Also Scale The Stand)
  • I Used PLA But I Suppose That Any Rigid Material Is Fine (Any Color)
  • Use A Big Layer Hight (I Used 0.28mm)
• For The Stand :
  • 15 % Infill
  • Print As-Is Or Scale (If You Scale Also Scale The Globe)
  • I Used PLA But I Suppose That Any Rigid Material Is Fine(Any Color) 
  • Use A Big Layer Hight (I Used 0.28mm)

Assembly Instructions :

Press The Narrow Part Of The Globe In To The Hole In The Stand So It Looks Like In The Picture :

If The Globe Part That You Need To Put In The Hole Is Too Big Then Cut / File It Down A Bit Or Make The Hole Larger Using A Nail File (The Tolerances Are Near Zero )

IF YOU FILE IT DOWN PLEASE WEAR A MASK , THERE MAY BE MICROPLASTICS .

This Was Originally Uploaded To Maker World By Myself Here