Monitor Stand Desk Lamp Mount

Do you have a monitor stand with a 32mm ID vertical tube like these?

https://www.amazon.com/dp/B072N1MFJK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

https://www.amazon.com/dp/B018MSDG84/ref=sspa_dk_rhf_yoy_pt_sub_13/?_encoding=UTF8&ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9yaGZfeW95&pd_rd_w=x5wwU&pd_rd_wg=NdIz0&pd_rd_r=67983048-f1f5-473b-9d5b-e30d39756b03&content-id=amzn1.sym.87a48bff-0d65-465c-9848-dfd8668d09df&ref_=sspa_dk_rhf_yoy_pt_sub&th=1

Remove the base from a desk lamp and put it on top of the stand. Is there tremendous screen glare or blinding light directly in your eyes? Only if you cant aim.

There are four radial holes for four m3 x 4.5 x 5.7 Heat set inserts that allow an individual to center or affix the desk lamp using four m3x16 screws. Do you need all four screws? who are you comrade question?

The hole has a diameter of 8mm, the plug works for any tube with an inner diameter 31.9mm>x<35mm, Print with more than 4 walls and triangular infill or the lamp will destroy the plug as you adjust its position. I used PLA, maybe that doesn't work for you.