Microcontroller Wall/Surface Mount Enclosure for ElectroCookie Solderable Breadboard

Base:
For use with the ElectroCookie solderable protoboard as well as various clones. 
Amazon ASINs: B07ZV8FWM4, B08BWPGSSC, B09WZY8H3X
Designed to be wall or surface mounted.
Accommodates microcontrollers such as ESP32, Wemos D1 Mini, etc.
Uses two M3 embedment nuts for attaching the board. Board can be removed without unmounting the base.
Board sits flush in base to allow edge connectors.

Lid:
Port for usb cable. Port sized for optional 13x27 mm oval grommet.
Attaches flush to base. Insertion tabs to align and hold lid to base. 
Counterbored M3 holes for optional screw attach to base. Use 20 mm standoffs to mount the board, with M3 screws for the lid.
Vented.
This is the base design I use for lids, adding additional connection ports for specific projects.

Printing: recommend 15% infill. Print with supports for the lid.

If it works for you, please Like and post a Make with photo for others to see.