W-Resources M-01 Metroplex Stand

This is a stand to keep the weight off the hips of the W-Resources M-01 Metroplex action figure.   This is based off of the original design of The Reflector Files who made it out of wood.  I have modeled it to be printable.  There is a 5mm hole down the center if you wish to accommodate a rod for support.  This can support a 3/16 metal, wooden, or fiberglass rod.  There are also alignment pegs which you may find is enough to support the figure.  I recommend printing this from petg but pla may be good enough.  Please use at least 3 walls.  Note you will need to spread the hips out a little to fit the stand.