Wiha 26197 Precision Screwdriver Case

Holds the Wiha 26197 Precision Screwdriver Set. Solidworks and STEP files are included for remixing.

The finished assembly requires 4 M3 x 20mm screws (McMaster PN: 91292A123) and 4 3/8" adhesive backed bumpers (McMaster PN: 95495K931) if you want them.

The Case Bottom was printed out of Overture White PLA at 0.2mm layer height, 15% infill, 4 perimeters, no supports.

The Case Lid was printed out of eSun Semi-Transparent Green PETG at 0.2mm layer height, 15% infill, 4 perimeters, no supports.

The Case Latch was printed out of Overture Red PLA at 0.2mm layer height, 15% infill, 4 perimeters, no supports, 5mm brim.

Changed the outer shell, added a hinged lid with a snap latch.