Rock Lee Manga Panel Hueforge

One of my favourite moments of the chunin exams, just ranking after the moment where Lee took off the ankle weights.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 120.73x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyLite Grey Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.